Q326 Small Tumblast Shot Blast Cleaning Machine For Small Castings Metals
Apron Shot Blasting Machine Description
The machine adopts the endless rubber apron to form a special barrel, and make the work pieces tumble continuously during shot blasting process.
It is mainly used in forging work pieces and metal work pieces. The machine can be used not only as a single machine, but also as a part of a line.
Tumble belt type shot blasting machines are used to clean casting, forgings, stampings of crisp workpiece and surface adhering sand, rust layer of oxide, burrs of non-brittle parts.
Classification:
Item NO.: 3GN Tumble Belt Type Shot Blasting Machine With Manual Door
Item NO.: 8GN tumble belt type shot blasting machine with manual door
Item NO.: 8GN tumble belt type shot blasting machine with Pneumatic door
Item NO.: 8GN-5R tumble belt type shot blasting machine with Automatic Feeding And Vibrator Conveyor
Item NO.: 15GN Steel belt shot blasting machine with Automatic Feeding And Vibrator Conveyor
Item NO.: 28GN Steel belt shot blasting machine with Automatic Feeding And Vibrator Conveyor
| No |
Item |
Unit |
3GN |
8GN-5R |
8GN |
15GN |
28GN |
| 1 |
Productivity |
t/h |
0.6-1.2 |
3.0-5 |
2-2.5 |
5-8 |
10-14 |
| 2 |
Feeding amount |
kg |
200 |
800 |
600 |
1300 |
3500 |
| 3 |
Max. weight of single piece |
kg |
10 |
150 |
30 |
250 |
365 |
| 4 |
Diameter of end disk |
mm |
650 |
1000 |
1000 |
1092 |
1245 |
| 5 |
Effective volume |
cubic meters |
0.15 |
0.4 |
0.3 |
0.43 |
0.79 |
| 6 |
Abrasive flow rate |
kg/min |
120 |
250 |
250 |
480 |
2X350 |
| 7 |
Ventilation capacity |
cubic meters/h |
2000 |
6000 |
3500 |
5000 |
6000 |
| 8 |
Power consumption |
kw |
12.6 |
32.6 |
24.3 |
50 |
64 |
| 10 |
Track type |
Belt |
Rubber |
Rubber |
Rubber |
Metal |
Metal |
Q326 Shot Blasting Machine Feature :
This small shot blasting machine uses wear proof rubber belt to load castings.
The tumble blast machines with rubber belt conveyor are employed for the surface treatment of batches of parts, loaded manually or automatically by means of a hydraulic skip loader.
The belt conveyor is made of wear-proof rubber. Its rotation makes the parts tumbling, and by this movement the whole surfaces of the parts are exposed to the shots thrown by the turbines.
The offloading of the parts is obtained by the rotation of the belt conveyor in the opposite sense. Parts can fall directly into the empty container or through an offloading belt or vibrating conveyor.
The max loading capacity can vary from 200 to 600 Kilos in weight
Working Principle:
Put the cleaning workpiece into the shot blasting chamber, and close the door, the machine starts, the workpiece is drum driven, and begin to roll, at the same time the shot form a fan-shaped beam by blast wheel high-speed blasting and uniformly blow on the surface of the workpiece. shot and grit from the holes on the belt flows into the bottom of the screw conveyor, fed into the elevator and sent them to separator for separation by the elevator. The dusty gas sent to the precipitator by the suction fan after filtration, change the clean air to the atmosphere, dust falls precipitator at the bottom of the dust box, the user may be periodically cleared by air blowback. Waste sand outflow by the waste pipe and it can reuse. Shot sand mixture recycling reuse pipe into the chamber body, to be separated separation and reuse; clean projectile by the for pill Gate into the blast wheel throwing wage pieces.
Packing and container:
2setsx3GN tumble belt type shot blasting machine will be load one 20feet container
3setsx8GN tumble belt type shot blasting machine will be load one 40feet container
2setsx8GN-5R tumble belt type shot blasting machine will be load one 40HQ container
Choosing the best machine for you :
In order to give you the suitable Shot Blasting Machine , please provide below message for us :
1. What is your workpiece and the material and the shape ?
2.The Max. Length/Width/Height of the workpiece and the MAX./MIN.weight of your workpiece ?
3.The productity you need to blasting the workpiece ( how many T or piece per day or per month?)
4. The power supply you need ( Our China :380V, 3PH, 50HZ)
5. Better to send us the workpiece photo or drawing.
Welcome to contact us or visit our factory in Qingdao China.
){kind=link}