Roller Bar Shot Blasting Machine
The application of this Roller Bar Shot Blasting Machine:
This series equipments use all protects and the non-pit design, and is disposited wire rods special-purpose force built-in impeller heads, the wearing parts are few, the replacement is simple quickly, the production efficiency is extremely high.
1. Remove rust and oxide layer on the surface of the wire.
2. After blasting, wire rod surface presents a uniform roughness, which will help to increase the adhesion of the aluminum clad copper clad, cladding uniform will never fall off.
3. Eliminate the internal stress generated in the wire drawing process.
4. Increase the wire surface tensile strength and resistance to stress corrosion cracking, permanent life. The machine is best suitable models for wire surface oxide skin treatment.
The performance of the Shot Blaster For Steel Bar :
The size of workpiece: 7-32mm, The speed of cleaning: Max.40-90M/min
Shot Blaster For Steel Bar :
Special design based on the requirements of client is our best advantage and if you need our machine, please contact us any time, we will give you the best service.
Key Features of Wire Bar Shot Blast Machine :
It is used to remove oxidized surface, rust and other matters on all kinds of wire metal surface.
It can improve technique characteristics of wires, enhance resistance, promote quality of products and decrease labor force and pollution in work site.
Technical parameter:
We will recommend you the right machine according to the workpiece and your requirement.
Technical parameter of Shot Blasting Machine |
No. |
ModelItem |
Q698 |
Q6912 |
Q6915 |
Q6920 |
Q6925 |
Q6930 |
Q6940 |
1 |
Width of workpiece |
mm |
800 |
1200 |
1500 |
2000 |
2500 |
3000 |
4000 |
2 |
Size of inlet opening |
mm |
800*1600 |
1200*400 |
1500*400 |
2000*400 |
2500*800 |
3000*800 |
4000*400 |
3 |
Length of workpiece |
mm |
1200-12000 |
1200-6000 |
1200-12000 |
1200-12000 |
3000-12000 |
2400-12000 |
4500-18000 |
4 |
Roller speed |
m/min |
0.5-4 |
0.5-4 |
0.5-5 |
0.5-4 |
0.5-4.5 |
0.5-4 |
2-8 |
5 |
Thickness of plate |
mm |
3-60 |
3-60 |
1.5-60 |
3-60 |
3-60 |
3-110 |
4.5-110 |
6 |
Abrasive flow rate |
kg/min |
8*120 |
4*250 |
4*250 |
6*250 |
6*250 |
6*360 |
8*360 |
7 |
Abrasive initial fill |
kg |
4000 |
4000 |
4000 |
4500 |
4500 |
8000 |
11000 |
8 |
Adjusting height of rolling brush |
mm |
400 |
200 |
350 |
450 |
600 |
850 |
900 |
9 |
Ventilation capacity |
m3/h |
22000 |
17560 |
19000 |
19550 |
27758 |
28050 |
38000 |
10 |
Total power of shot blast machine(no dust
collector) |
kw |
90 |
78.3 |
113.6 |
156.6 |
224.55 |
204.8 |
29 |
FAQ:
Q:What standards are you carrying out for your products?
A: We produce according to the ISO9001 and ISO14001 rules.
Q: How to install the machine?
A: We will arrange 1~2 engineers to your factory to guide installation and assembly.
Q: What's your international market?
A: We Have exported to about 40 countries and regions all around the world, such as, the USA, France, Singapore, Australia, Middle East, Brazil, Peru and so on.
Q: What's your productivity?
A: We have three production lines, the first work shop for steel cut wire shots, the second workshop for blasting wheel ,the thired work shop for shot blasting machine.
Quality and After-sale Assurance:
1. Supplier promise the name, model, specification and quantity comply with technical protocol,
assuring the machine is new equipment with qualified material manufactured through perfect technology.
There are no defects in design, material and technologies, which is suitable for propose of demander,
and meets the standard of national industry. The quality is stable and reliable.
2. Equipment warranty and After-sale Assurance Engineers available to service machinery overseas
( except force majeure, inappropriate operation and the quick-wear parts wears).
3. The equipment will pass the installment and test before delivery, after the quality is qualified,
we will disassembly the equipment, coating and deliver.
Trade Term:
Payment term: 30% as deposit, 70% balance against the copy of B/L
Delivery of the goods is executed within 45 days after receipt of advance payment.
Manufacturer must provide the certificate of origin to buyer.
Our machines were exported to France, Spain ,Russia, Mexico , Japan,korean, Pakistan,Vietnam,Thailand,Southeast Asia and other countries , so hope you can trust our professional technology and strength !
In order to give you the suitable machine , pls provide below message for us :
1. What is your workpiece and the material and the shape ?
2.The Max. Length/Width/Height of the workpiece and the MAX./MIN.weight of your workpiece ?
3.The productity you need to blasting the workpiece ( how many T or piece per day or per month?)
4. The power supply you need( Our China :380V, 3PH, 50HZ)
5. Better to send us the workpiece photo or drawing.
Welcome contact me or visit our factory in Qingdao China.