CE Certificate Round Steel Bar Shot Blasting Machine

• Customization: Available
• After-sales Service: Lifetime Service
• Warranty: 1 Year
• Model NO.: Q6915
• Fuel: Electric
• Type: Catenary-Through Abrator
• Cleanliness: High Cleanliness
• Automation: Automatic
• Certification: CE, ISO
• Feature: Non-Ionic
• Condition: New
• Customized: Customized
• Tube Shot Blasting Machine: Steel Pipe Shot Blasting Machine
• Pipe Sand Blasting Equipment: Pipe Sand Blasting Equipment
• Bar Shot Blasting Machine: Outside Steel Bar
• Dry Cleaning Machinery: Dry Shot Blast Cleaning Machinery
• Shot Blasting: to Remove The Oxide Layer
• Shipyard Industry: Shot Blasting: Steel Plates, Angles
• Steel Mill Industry: Shot Blasting: Strips, Angles, Channels, Pipes, Te
• Air Polution Control Equipments: Applications: Foundry, Carbon Black, Furnace, Cupo
• Railway Industry: Shot Blasting: Side Frames, Bolster, Couplers, Rai
• Shot Blasting Machine: Auto Sand Blasting Machine
• Transport Package: According to Clients′ Request
• Specification: SA2.5 -3.0 CE ISO9001
• Trademark: KEEJOO
• Origin: Qingdao, China
• HS Code: 84243000
• Production Capacity: 1500sets/Y
• Package Size: 250.00cm * 250.00cm * 300.00cm
• Package Gross Weight: 2300.000kg

Product Description

                                         Round Steel Bar Shot Blasting Machine


MACHINE :

This series equipments use all protects and the non-pit design, and is disposited wire rods special-purpose force built-in impeller heads, the wearing parts are few, the replacement is simple quickly, the production efficiency is extremely high.
1. Remove rust and oxide layer on the surface of the wire.
2. After blasting, wire rod surface presents a uniform roughness, which will help to increase the adhesion of the aluminum clad copper clad, cladding uniform will never fall off.
3. Eliminate the internal stress generated in the wire drawing process.
4. Increase the wire surface tensile strength and resistance to stress corrosion cracking, permanent life. The machine is best suitable models for wire surface oxide skin treatment.



TECHNICAL INDEX : 
 

Technical parameter of Shot Blasting Machine
No.	ModelItem		Q698	Q6912	Q6915	Q6920
1	Width  of workpiece	mm	800	1200	1500	2000
2	Size of inlet opening	mm	800*1600	1200*400	1500*400	2000*400
3	Length of workpiece	mm	1200-12000	1200-6000	1200-12000	1200-12000
4	Roller speed	m/min	0.5-4	0.5-4	0.5-5	0.5-4
5	Thickness of plate	mm	3-60	3-60	1.5-60	3-60
6	Abrasive flow rate	kg/min	8*120	4*250	4*250	6*250
7	Abrasive initial fill	kg	4000	4000	4000	4500
8	Adjusting height of rolling brush	mm	400	200	350	450
9	Ventilation capacity	m3/h	22000	17560	19000	19550
10	Total power of shot blast machine(no dust collector)	kw	90	78.3	113.6	156.6

APPLICATION :

Steel Tube Shot Blasting Machine is widely used for metal gridding, steel tube, petroleum, chemical, electric power industry. It is a kind of dry cleaning machinery. In the process of forming, processing, transporting and storing of the work piece, there will always be oxide coating, rust, slag, dust, oil and others on the surface. The Steel Pipe Shot Blasting Machine uses high-speed blast to strike and cut the surface of the work piece in dry and non-fluid media, and realize the cleaning purpose.

SHOT BLASTING APPLICATION: 
 

Agriculture industry
Shot blasting: Tractor components, water pumps, farm implements, etc. 

Automobile industry
Shot blasting: Engine blocks, cylinder heads, break drums, etc. 

Building & infrastructure industry
Shot blasting: Structural steel, bars, transmission & television towers, etc. 

Transportation industry
Shot blasting: Engine blocks, axle & crank shafts, diesel engine components, etc. 

Oil & gas industry
Surface preparation: Pipes coating with paper, cement, epoxy, polythene, coal tar, etc. 

Mining industry
Shot blasting: Bulldozer, dumpers, crushers, land fill equipments, etc. 

Foundry industry
Shot blasting: Automobile, tractor, scooter & motor cycle components, etc. 

Aluminum casting industry
Shot peening: Automobile, scooter & motor cycle components, etc. 

Forging industry
Shot blasting: Crank shafts, connecting rods, torsion bars, other forged components, etc. 

Railway industry
Shot blasting: Side frames, bolster, couplers, rail wheel, entire coach, etc. 

Electrical industry
Shot blasting: Motor body, transformer tank, transmission tower, etc. 

Energy & power industry
Shot blasting: Sturbines, boilers, switch gear components, wind mill blades, column, etc. 

Stainless steel industry
Shot blasting: Strips, angles, channels, pipes, tee, etc. 

Aviation industry
Shot peening: Jet engine, blades, propeller, turbine, hubs, land gear components, etc. 

Shipyard industry
Shot blasting: Steel plates, angles, channels, beams, etc. 

Steel mill industry
Shot blasting: Strips, angles, channels, pipes, tee, etc. 

Air polution control equipments
Applications: Foundry, carbon black, furnace, cupola, etc. 

Ceramic/paver industry
Applications: Antiskid, footpath, hospital, government buildig, public places, etc. 

SERVICE :

In order to give you the suitable machine , pls provide below message for us :
1. What is your workpiece and the material and the shape ?
2.The Max. Length/Width/Height of the workpiece and the MAX./MIN.weight of your workpiece ?
3.The productity you need to blasting the workpiece ( how many T or piece per day or per month?) 
4. The power supply you need( Our China :380V, 3PH, 50HZ)  
5. Better to send us the workpiece photo or drawing.


TRADE TERMS:

1. Production time: 35 days 
2. Installation and commissioning time: 40 days
3. Installation and commissioning issue: we will send 1-2 technicians to help with machine installation and commissioning for our shot blasting  machine, the customer pays for their tickets,hotel and diet, and salary is USD 60 per day  per person.
4. Warranty time of shot blasting  machine: 12 months from date of commissioning    completion, but no more than 18 months from date of delivery.
5. Payment terms: 30% as down payment, 70% balance at sight of B/L copy before delivery6. We supplies full English documents, including general installation drawing, pit  design drawing, manual book, electric wiring diagram, electric manual book, maintenance  book and etc.



COMPANY POWER:

All machine has aproved CE ISO901 Certification.
Our machines were exported to France, Spain ,Russia, Mexico , Japan,korean, Pakistan,Vietnam,Thailand,Southeast Asia and other countries , so hope you can trust our professional technology and strength !