Large Beam and Steel Structure Sand Blasting Booth
1. Application of Sand Blasting Cabinet Sand Blasting Cabinet to Clean Large Beam and Steel Structure
This machine is suitable for cleaning sand in the casting residual sand surface of casting clay, iron and other impurities and cleaning profiles, pipes and iron surface rust and others. It's more suitable for cleaning high difficulty of rugged piece, and can also clean the forging and heat treatment, welding parts. The abrasive in tank body (steel shot, sand) is high-speed spraying by sandblasting pipe under the action of compressed air, and the abrasive media is spraying to the workpiece surface and impact grinding, remove debris, and this machine object appearance, durable.
This Sand/Shot Blast is powered by compressed air, the projectile is accelerated to 50-60m / s and impact to the surface of a non-contact, less polluting surface treatment method, it has arranged flexible, easy maintenance, one-time investment less, etc., and therefore numerous structural parts manufacturers favor it.
2. Sandblast machine specification
Manual simple Intermittent sandblasting device with one gun
| Item No. |
Q0250A |
| The overall dimension(mm) |
1038×813×1880 |
| The volume of pot body (m3) |
0.52 |
| Air pressure (mpa) |
0.6 |
| The capacity of blasting(kg/h) |
1800-2280 |
| The length of blasting pipe(m) |
10 |
| The Blasting Abrasive |
Steel shot, steel ball, quartz stone, Copper sand , brown alumina |
| The size of Standard abrasive (mm) |
0.8-1.5 |
| The cleaning grade |
Sa2-3 |
| working efficiency(/h) |
13-18(spray nozzleφ10) |
| the quality of the machine(kg) |
380 |
| Air consumption( m 3/min) |
6 |
Intermittent sandblasting device with double guns
| Item No. |
Q0250A-II |
| The overall dimension(mm) |
1122×902×1892 |
| The volume of pot body (m3) |
0.7 |
| Air pressure (mpa) |
0.6 |
| The capacity of blasting(kg/h) |
3600-4560 |
| The length of blasting pipe(m) |
10X2 |
| The Blasting Abrasive |
Steel shot, steel ball, quartz stone, Copper sand , brown alumina |
| The size of Standard abrasive (mm) |
0.8-1.5 |
| The cleaning grade |
Sa2-3 |
| working efficiency(/h) |
26-36 (spray nozzleφ10) |
| the quality of the machine(kg) |
460 |
| Air consumption( m 3/min) |
6X2 |
Intermittent sandblasting device with three guns
| Item No. |
Q0250A-III |
| The overall dimension(mm) |
1500×1300×2205 |
| The volume of pot body (m3) |
1.5 |
| Air pressure (mpa) |
0.6 |
| The capacity of blasting(kg/h) |
3600×3 |
| The length of blasting pipe(m) |
3×3 |
| The Blasting Abrasive |
Steel shot, steel ball, quartz stone, Copper
sand , brown alumina |
| The size of Standard abrasive (mm) |
0.8-1.5 |
| The cleaning grade |
Sa2-3 |
| working efficiency(/h) |
39-54(spray nozzle φ10) |
| the quality of the machine(kg) |
750 |
| Air consumption( m 3/min) |
6×3 |
3.Main Technical Parameters of Sand Blasting Cabinet Sand Blasting Cabinet to Clean Large Beam and Steel Structure
| NO. |
NAME |
| 1 |
Size of the Blast Room |
| 2 |
Name of the Item/System |
| 3 |
Purpose |
| 4 |
Quantity |
| 5 |
Material Handling |
| 6 |
Cleaning Standard |
| 7 |
abrasive types and specifications |
| 8 |
work efficiency |
| 9 |
surface roughness after surface treatment |
| 10 |
Sand Cleanliness |
| 11 |
abrasive dust separation rate |
| 12 |
Dust gas filtration efficiency |
| 13 |
dust concentration outside of blasting room but in the factory |
| 14 |
Noise Level |
| 15 |
Sand blasting device
(continuous type blasting with two guns) |
| 16 |
Blasting gun |
| 17 |
Horizontal section wind speed in blasting room |
| 18 |
Structure of the Room |
| 19 |
Fixed work platform |
| 20 |
Still gratings floor |
| 21 |
Abrasive recovery system(Conveyor) |
| 22 |
Dust Separator |
| 23 |
Dust Collector |
| 24 |
Blower / Fan |
| 25 |
chimney |
| 26 |
Rail and Trolley
(Electric rail flat car ) |
| 27 |
Pneumatic vacuum pill machine |
| 28 |
Compressed air pressure |
| 29 |
Air conditioning type sandblasting clothing |
| 30 |
lighting / illuminating system |
| 31 |
Control system
(remote control operation and automation abrasive loading) |
| 32 |
Dust emission concentration |
| 33 |
Over all Power Consumption |
4. Our Service
4.1. Reply your inquiry in 24 working hours.
4.2. Experienced staffs answer all your questions in fluent English.
4.3. Customized design is available.
4.4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
4.5. Professional factory: We are manufacturer and directly exporter, specializing in producing all kinds of foundry machinery for more than 20 years, competitive with good quantity and the best service.
4.6. Before shipping , almost machines must be trail run and have a certification from QC.
4.7. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.
5.RFQ:
Model NO.you can choose it according to your request
Style:Mobile Style
Physical Machine Type:Mechanical Cleaning Method
Usage:Mechanical Engineering
Machine Type:High Pressure Cleaner
Fuel:Compressed Air
Clean Type:High Pressure Cleaner
Cleaning Process:Shot Cleaning
Certification:CE, ISO
Principle:Physical
Nozzle Material:Boron Carbide
Hose Length:10-30 M( according to your request )
Air Consumption:3 M3/Min
Nozzle Size:8-16mm
Application:Open Area Blasting Work
Protection Clothes:Yes
Export Markets:Global
6. Contact Us
Bonnie Peng
Qingdao Hesong Machine Co.,Ltd.
){kind=link}
){kind=link}